DT Codes . com
DTC - Diagnostic Trouble Codes information

P0008

Powertrain Codes

P0008 - BUICK - Engine Positions System Performance Bank 1

Symptoms

- Engine Light ON (or Service Engine Soon Warning Light)

Possible Causes

- Engine mechanical problems - Incorrect timing chain - Stretched timing chain - Failed camshaft actuator or actuator solenoid

When Detected

The ECM detects that both camshafts on either bank of the engine are mis-aligned with the crankshaft for more than 4 seconds or a cumulative of 50 seconds.

Tech Notes

There is a factory service bulletin for the following Buick models: 2004-2006 Buick Rendezvous 2005-2008 Buick Lacrosse 2008 Buick Enclave The service bulletin suggest replacing the primary drive and both secondary drive timing chains. Contact your Buick dealer for more information. The repair could still be cover under factory warranty.

Description

The Engine Control Module (ECM) monitors the position of both camshafts and the crankshaft. The ECM performs a test for misalignment between both camshafts on one bank of the engine and the crankshaft. During the test the ECM learns the position of the camshafts and the crankshaft. While the engine is idling, the ECM compares the position of both the camshafts and the crankshaft with the learned value. The ECM will set the P0008 code if both learned values for one bank of the engine are exceeding a calibrated threshold in the same direction.