DT Codes . com
DTC - Diagnostic Trouble Codes information

P0174

Powertrain Codes

P0174 - JEEP - Fuel System 2/1 Lean

Symptoms

- Engine Light ON (or Service Engine Soon Warning Light) - Excessive Fuel Consumption

Possible Causes

- Intake air leaks - Faulty front heated oxygen sensor - Ignition misfiring - Faulty fuel injectors - Exhaust gas leaks - Incorrect fuel pressure - Lack of fuel - Faulty Mass Air Flow (MAF) sensor - Incorrect Positive Crankcase Ventilation (PCV) hose connection

When Detected

- Fuel injection system does not operate properly. - The amount of mixture ratio compensation is too small. (The mixture ratio is too lean.)

Tech Notes

Dirty air filter or faulty air flow sensor are common causes for the P0174 code of the problem.

Description

With the Air/Fuel Mixture Ratio Self-Learning Control, the actual mixture ratio can be brought closely to the theoretical mixture ratio based on the mixture ratio feedback signal from the heated oxygen sensors 1. The Engine Control Module (ECM) calculates the necessary compensation to correct the offset between the actual and the theoretical ratios. In case the amount of the compensation value is extremely large (The actual mixture ratio is too lean.), the ECM judges the condition as the fuel injection system malfunction and light up the MIL (2 trip detection logic).