P0510
Powertrain Codes
P0510 - NISSAN - Closed Throttle Position Switch Fault
Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Engine idle problems
- Possible hard to start
- Possible shifting problems
Possible Causes
- The closed throttle position switch Harness or connectors is shorted - Closed throttle position switch - Throttle position sensor
When Detected
Malfunction is detected when battery voltage from the closed throttle position switch is sent to ECM with the throttle valve opened.
Tech Notes
There is a Nissan bulletin for the following models:
1995-1996 Nissan Maxima
1995-1997 Nissan Sentra/200SX
1996-1997 Nissan Truck
1995-1997 Nissan Altima
1996-1997 Nissan Pathfinder
1995-1996 Nissan 240SX
1996-1997 Nissan Quest
Nissan Service Bulletin OBDII Code P0510
Description
A closed throttle position switch and wide open throttle position switch are built into the throttle position sensor unit. The wide open throttle position switch is used only for A/T control. When the throttle valve is in the closed position, the closed throttle position switch sends a voltage signal to the ECM. The ECM only uses this signal to open or close the EVAP canister purge volume control solenoid valve when the throttle position sensor is malfunctioning.